This system is used as a pre-filter when filling your RV/Boat tank and used as a regeneration kit when regenerating your water softener. Great for RVs, boats, campers, car washing, and much more. This unit is designed to reduce the amount of time it takes to regenerate your portable water softener and increase the efficiency of the regeneration cycle. This kit will regenerate a full 16,000 grain system in 30 minutes with no hassle of lifting, shaking, or pouring in salt through a tiny hole. With each full load of salt (2lbs) this unit will regenerate a 16,000 grain system in one backwash cycle. This unit doubles the efficiency of your regeneration cycle by fully mixing the brine with your resin. The old method of pouring in salt on top of the resin bed will only regenerate about 40% of the resin. The old method requires heavy lifting, 1 to 1.5 hours of your time, and is a major inconvenience. Eliminate the hassle, properly regenerate your water softener, and no more heavy lifting.
PRE-FILTER: Stage 1) Filters sediment, dirt, rust, and other debris that are 20X smaller than a human hair. Protects other filter systems as well as your appliances and faucet from clogging. Stage 2) Filters Chlorine, Taste, Odor, and many more contaminants to provide healthy safe water. This unit helps protect and extend the life of other systems like Water Softeners, plastic holding tanks, pipes, hoses, and metal components.
Replacement Pre-Filter Part Number: FC-9-PF.
REGENERATION KIT: Double the efficiency of your regeneration by fully mixing brine/salt through the entire unit, not just the top 40%. Use the included brine hose and quick-connect fittings to easily connect the unit to your water softener using standard garden hose ports. This unit works by filling the housing with salt and running brine through the backwash cycle. For larger systems over 16,000 grains, you will simply refill the housing and run an additional cycle. Warranty: 1-year and a 30-day money-back guarantee.