PRO+AQUA |
Replacement PRO-WELL-1E Prefilled Tank with Media
Replacement prefilled tank with media, bottom basket, and riser tube for the PRO-WELL-1E Whole House Well Water Filtration System. Fully assembled and ready for installation.
Valve Head and other parts are NOT included.
Are you noticing odors and iron stains starting to come back? This is a sign that the media has been exhausted and it is time to change your Media Tank.
We simplified the maintenance process by prefilling the media and installing the bottom basket with the riser tube. This replacement tank is ready to swap, making your maintenance as easy as removing the valve head and swapping it out.
How to install: (Caution, item will be heavy and full of water).
- Shut off your feed water.
- Shut off the Bypass behind the Valve Head.
- Uninstall the Bypass from the Valve Head.
- In an open area, remove the Valve Head from the Tank.
- Rinse the bottom of the Valve Head and brush any debris
(ensure to not wet the electronics) - Inspect and lubricate all the O-rings on the Valve Head.
- Install the Valve Head onto the new replacement Tank.
- Install the Valve Head onto the Bypass
- Slowly turn on the feed water (check for leaks).
- Slowly open the Bypass valve (check for leaks).
- Run a Rapid Rinse Cycle to flush out debris.
- The System is ready for use.
Need support?
We’re here to assist you every step of the way. Access product support and frequently asked questions in our Support Center.
Support Center